1、 One car can hold three mechanical vehicles
The automatic loading mixer can load, mix, transport and unload at a fixed point. It can replace some functions of loaders, mixers, transporters and pump trucks. Some people have questioned the practicability of the self loading mixer, because it seems that it can do anything, don't really use anything. But it has been proved by practical operation that it is not only practical, but also very practical. It is born to produce concrete and solve the surrounding problems.
2、 Efficiency sling mixer
Take the 4.0 m3 mixer truck of Zhongke Jufeng machinery heavy industry as an example. On average, a can of material is discharged every 12 minutes. If the operation is 8 hours, the concrete output can reach 500 tons per day, which is several times more efficient than using the mixer alone.
3、 You can buy another car with all the cost savings
The cost that can be saved by automatic feeding mixer is material cost and labor cost.
4、 You can go up the mountain, you can go down the pit, you can walk on the plateau
It's too difficult to go up the mountain for a large tank truck, but it's very simple for an automatic feeding mixer.
Plateau is also appropriate for the automatic feeding mixer. It can customize the "plateau machine" in line with the local environment for users. How can the automatic feeding mixer "play well" on the plain and how to "play well" on the plateau.
5、 "Road disobedience" in rural areas
The road up the mountain is rugged and turns, and the road to the village is narrow. In recent years, rural infrastructure projects are in full swing, such as road construction and hardening, renovation of old houses, etc., each of which symbolizes the arrival of a better new life for villagers. However, the road to the village is not so simple. It is not only pitted and potholes, but also extremely narrow. It is natural that large tank trucks can not enter. However, since the loading mixer is not satisfied with the road, it can easily cope with this phenomenon.
The cleaning of automatic feeding mixer can ensure good performance.
1. After daily operation, the driver is responsible for pouring clean water into the mixing tank and rotating it at high speed (14-18rpm) for 5-10 minutes, and then drain the water to ensure that the drum is clean. When cleaning all parts of the mixing drum with high-pressure water, care should be taken to avoid using parts such as appearance and operating lever. The distance between the pressure water nozzle and the exterior of body paint shall not be less than 40 cm.
2. After unloading at the construction site, the hose attached to the automatic loading mixer should be used to flush the hopper, hopper, discharge chute, etc. to remove the sludge and concrete attached to the vehicle body. On the way back to the mixing plant, 150-200l of water shall be injected into the mixing tank to remove the concrete residue adhering to the tank wall and blades. The pressure of the hydraulic system should be in accordance with the provisions of the operation manual, and can not be adjusted at will. The quality and quantity of hydraulic oil shall meet the original requirements.
3. In winter construction, the following work should be done: check whether there is icing before starting; after work, carefully clean the residual water in the mixing tank and water supply system, turn off the pump switch, and put the control handle in the "stop" position.
4. Understand the structure, working principle and operation method of automatic feeding mixer. The cleaning operation of automatic feeding mixer is very important for performance.
Automatic feeding mixer tells you what advantages of automatic feeding mixer are worth buying! Everyone in the purchase process must be based on their own needs to consider!