建筑工程是離不開三輪底盤攪拌車的,這時大家都知道的,攪拌車在工地上進行工作,工作環境也是可想而知的,為保障三輪底盤攪拌車的使用性能,在使用完畢后還需及時進行清理,但是洗車過程也不是那么簡單,想要給三輪底盤攪拌車洗得干凈并且有不對車輛造成傷害的話,您還需要掌握以下幾點方法。
The construction project is inseparable from the three wheel chassis mixer. At this time, we all know that the mixer works on the construction site, and the working environment can be imagined. In order to ensure the service performance of the three wheel chassis mixer, it needs to be cleaned in time after use, but the car washing process is not so simple, If you want to clean the three wheeled chassis mixer and do no harm to the vehicle, you also need to master the following methods.
洗車過程中的注意事項:
Precautions during car washing:
一、保持三輪底盤攪拌車的清潔(留意經常和實時地清洗車輛),盡量利用專用車專用的清洗劑和堿性小的肥皂。
1、 Keep the three wheeled chassis mixer clean (pay attention to washing the vehicle frequently and in real time), and try to use the special cleaning agent and alkaline soap for the special vehicle.
二、留意按期上光:專用車行駛一段時間,應舉辦外貌磨光和上蠟處理懲罰。清洗劑利用的兩種要領:一種是磨料型,可擦掉外貌日漆氧化層;另一種是化學清洗劑,可溶解沉積的油污以便擦除。利用時,制止在陽光直射下打蠟。
2、 Pay attention to polish on schedule: when the special vehicle is driving for a period of time, it should be polished and waxed. There are two ways to use cleaning agent: one is abrasive type, which can wipe off the surface of Japanese paint oxide layer; The other is chemical cleaning agent, which can dissolve the deposited oil stain for erasing. When using, do not wax in direct sunlight.
三、雨后實時擦車。
3、 Clean the car in real time after the rain.
四、留意塑料件的潔凈要領:三輪底盤攪拌車外觀利用塑料件的許多。對上了油漆的塑料件,更要利用上好的清洗劑;上蠟時不能過重,防備穿透油漆暴露底色。
4、 Pay attention to the cleaning essentials of plastic parts: the appearance of three-wheel chassis mixer makes use of many plastic parts. For painted plastic parts, better cleaning agents should be used; Wax shall not be too heavy to prevent penetrating the paint and exposing the background color.
五、留意鍍光金屬件的保養:對鍍光金屬件,清洗時應利用炭精潔凈劑,不能利用硬質器具刮除臟物。鍍光件也應按期上蠟,以掩護鍍層不被氧化。

5、 Pay attention to the maintenance of light plated metal parts: for light plated metal parts, carbon cleaner shall be used during cleaning, and hard tools shall not be used to scrape away dirt. The plated parts shall also be waxed on schedule to protect the coating from oxidation.
六、留意防銹:三輪底盤攪拌車油漆和電鍍的部件一般都具有精采的防銹能力,但是對付車體上的焊點、接縫以及受過擦傷的部位則容易生銹。因此,車輛在利用一段時間后,應該舉辦須要的防銹處理懲罰。
6、 Pay attention to rust prevention: the painted and electroplated parts of the three wheel chassis mixer generally have excellent rust prevention ability, but it is easy to rust against the welding spots, joints and scratched parts on the car body. Therefore, after the vehicle is used for a period of time, the necessary anti rust treatment should be carried out.
七、防備零部件早期損壞,制止產生妨礙,擔保較高的出車率,耽誤水車的利用壽命,獲得較佳經濟效益。
7、 Prevent early damage of parts, prevent obstruction, ensure high departure rate, delay the service life of waterwheel and obtain better economic benefits.
八、查抄機油里是否進水,制止動員機太過磨損。
8、 Check whether there is water in the engine oil to prevent the mobilization machine from being too worn.
九、查抄三輪底盤攪拌車變速箱是否進水,制止齒輪磨損。
9、 Check whether there is water in the gearbox of three wheel chassis mixer to prevent gear wear.