1. Before start-up, all parts of the machine, equipment and system shall be confirmed, and the inspection shall be stopped to confirm that they are excellent before start-up. In fact, these problems are not the problems of accessories, but are directly related to our operation.
2. Before starting, put the mixing operating lever in the "neutral" position.
3. After startup, place the mixing operating rod at the "unloading" position to remove the accumulated water in the cylinder.
4. During material removal, the mixing control lever shall be placed in the "material removal" position.
5. Before transportation, the unloading chute shall be fixed at the "driving" position to avoid swinging.
6. When operating the operating lever, it should be in the "neutral" position for a little pause, and the front can move to the next position.
7. Do a good job in civilized construction, and it is forbidden to pour the excess materials in the barrel at will. After unloading, stop cleaning the mixing drum, chute, idler and other parts.
8. When a person enters the barrel to remove the concrete caking, the vehicle shall be turned off, the switch key shall be removed, and a person shall be arranged outside the barrel for supervision.
The automatic feeding mixer provides you with the above wonderful contents. For more wonderful contents, please click to enter our website: http://www.acrazyguywithablog.com We will have more content for you to check later.