1. Brake failure of automatic feeding mixer caused by insufficient maintenance
Usually, it lacks maintenance for the brake system of the charging mixer. When it is needed, it is likely to strike and cause disaster. Always check whether the master brake cylinder, brake wheel cylinder, air reservoir and pipeline are working well. In case of air leakage and poor working condition, it is necessary to repair or replace it immediately, and pay attention to the change of air pressure on the instrument during normal driving.
2. Unreasonable operation method leads to machine failure
Due to the lack of driving experience of the self loading mixer, the wrong operation of the self loading mixer leads to machine failure. When going down a long slope, lower the speed, use the engine to restrain the speed, use the brake as little as possible to prevent the brake pad from overheating, and when stepping on the brake, use the brake point instead of "one foot stuffy".
3. Serious overload, resulting in brake failure
Under the action of gravity acceleration, the motion inertia of self loading mixer increases, which directly leads to brake failure. The overload vehicle increases the total mass of the vehicle, thus increasing the inertia of the self loading mixer. When driving the overloaded vehicle, it must be slow, and do not ignore the safety of life in order to rush time.
The above is the automatic loading mixer for you to sort out the brake failure of several reasons, I hope to help you!